請安全使用高壓羅茨鼓風機！

　　Please use high-pressure Roots blower safely!

　　高壓羅茨風機與普通的羅茨風機對于風機各項參數要求嚴格，造價也相對較高，在使用過程中，我們需要注意以下幾點，保證自身的安全！

　　High pressure Roots blowers and ordinary Roots blowers have strict requirements for various parameters of the blower, and the cost is relatively high. During use, we need to pay attention to the following points to ensure our own safety!

　　1、避免觸碰機體外殼

　　1. Avoid touching the body shell

　　高壓羅茨風機在運行中，會產生較高的溫度，在使用中，避免碰觸外殼，以免造成燙傷等。

　　During operation, the high-pressure Roots blower generates high temperatures. In use, avoid touching the casing to prevent burns and other injuries.

　　2、避免線路過載

　　2. Prevent line overload

　　電機在工作過程中，會隨著壓力的變化而變化，我們?cè)谑褂脮r(shí)應當配置相當?shù)碾娋€，如果電線配置較低，很容易造成線路老化，或者過熱，引起火災。

　　During the operation of the motor, it will change with the change of pressure. We should configure appropriate wires when using it. If the wire configuration is low, it is easy to cause aging or overheating of the circuit, which can lead to fire.

　　3、避免風機超壓

　　3. Prevent fan overpressure

　　風機在運轉過程中，我們一定要對風機的壓力進行檢查，如果出現超壓的情況，要及時的釋放壓力，保證風機在額定范圍內使用。

　　During the operation of the fan, we must check the pressure of the fan. If overpressure occurs, we must release the pressure in a timely manner to ensure that the fan is used within the rated range.

　　4、避免封閉風機

　　4. Avoid closing the fan

　　高壓羅茨風機在運行中，風機周?chē)臏囟纫矔?huì)隨著電機的溫度上升而上升，風機置于密閉的環境中，風機周邊的溫度急劇上升，可能會造成嚴重后果。

　　During the operation of the high-pressure Roots blower, the temperature around the blower will also rise with the temperature of the motor. If the blower is placed in a closed environment, the temperature around the blower will rise sharply, which may cause serious consequences.

　　5、避免過濾不徹底

　　5. Avoid incomplete filtering

　　空氣在進入羅茨風機時一定要進行空氣過濾，保證空氣中的一些硬性雜質進入風機，這些影響雜質進入風機將會造成葉輪的損傷，長此以往，風機的使用壽命也會造成一定的影響。

　　When air enters the Roots blower, it must be filtered to ensure that some hard impurities in the air enter the blower. These impurities entering the blower will cause damage to the impeller, and over time, the service life of the blower will also be affected.

　　6、避免內部雜質

　　6. Avoid internal impurities

　　風機要進行定時清理，包括除去表面的一些灰塵，還有內部的一些積灰，這些雜質會造成風機散熱不暢、風量減低等故障。

　　The fan needs to be cleaned regularly, including removing some dust on the surface and some accumulated dust inside. These impurities can cause problems such as poor heat dissipation and reduced air flow in the fan.

　　7、避免易耗零件長期使用

　　7. Avoid long-term use of consumable parts

　　易耗部件包括消音器、外殼金屬網、皮帶、軸承等，這些易耗部件一定要進行及時的檢查，并定期更換，這些易耗部件的長期使用，會造成更大的風機故障。

　　Consumable components include mufflers, metal mesh shells, belts, bearings, etc. These consumable components must be inspected in a timely manner and replaced regularly. Long term use of these consumable components can cause greater fan failures.

　　8、避免帶問題運轉

　　8. Avoid operating with problems

　　風機如果出現異響、過度震動、異常噪音等，風機出現類似情況一定要停機檢查，排除故障之后再進行運行。

　　If the fan produces abnormal noise, excessive vibration, abnormal noise, etc., it must be stopped for inspection and troubleshooting before operation.

　　本文由 羅茨鼓風機  友情奉獻.更多有關的知識請點擊  http://www.szqjsy.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Roots blower For more related knowledge, please click http://www.szqjsy.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.